CAMERA TUTORIAL

-

To turn the camera on and off: locate the on/off switch and flick it on the top of the camera
Set the mode dial (top right hand side of the camera) there are a varied selection of settings turn the dial to the video camera setting to make sure it is in line with the indicator to record video.

Before shooting locate the 'af/mf' switch on the left side of the camera, chose either option you prefer and switch it to that. AF means AUTOFOCUS or MF means MANUAL FOCUS. Holding down the button half way will focus it with the current camera option it is on.

Pressing the camera button will start shooting the scene and pressing it again will stop the shooting of the current scene.

The ISO speed 100-6400 you can find the ISO by turning the wheel behind the shoot button. ISO is used to illuminate a dark room or dim something that is overly bright, The higher the ISO the brighter the photo/video will be, the lower the ISO means the darker and more dim the photo/video will be.

By holding down the AV with the + & - and turning the dial can change the exposure compensation.

Comments

Post a Comment

Popular posts from this blog

VISUAL EFFECT : PROJECT DIARY

-
Image
31ST FEBRURARY 2020: I took pictures of the settings the camera can achieve and i made a tutorial of how you can achieve these settings by clicking which buttons and how you use it. The things that went good for this project is everything. 3RD FEBRURARY 2020: I researched about three point lighting and wrote about how you can achieve these different lighting settings i put pictures next to information for reference. 14TH FEBRURARY 2020: 13TH MARCH 2020:  On this date Lucy & I filmed our scenes in the recording studio with different camera angles and a green screen. We then started editing our clips so that we could remove the green and add things to the background of our clip. The good parts of this process was us editing the clips as we were experienced with the software we were using, Lucy and I used Adobe After Effects to edit our videos by using the 'rotobrush tool.' The parts i believe we could have done better with are the camera shots and angles as we a...
Read more